Menu

Journey Through Septic Maintenance and Repair


About Me

Journey Through Septic Maintenance and Repair

Hello! I'm Alfred Alena. While living on a farm, we had to get our water from the well and process waste with a septic system. In the early years, that septic system caused us a boatload of trouble. The cause was a combination of user error and undeveloped parts. As we started to learn how to treat the septic system right, it clogged less often and ran much better. We also upgraded our septic parts to bring it into the modern era. The combination gave us a septic system that worked just as good as the sewers. I feel that sharing this information with the world will help people struggling with septic systems. I hope that my readers can use the information I share to end their struggles with septic cleaning and maintenance. I will also share information about hiring professionals to get the job done. Welcome!

Making The Switch From An Oil Furnace To A Gas Furnace

If you have an oil furnace heating your home, you are most likely hit with a large energy bill each time you need to refuel. The cost of oil is rather high and many people consider having their oil furnaces replaced with gas furnaces at some point. Here is some information that will help you go about the proper procedure to have your furnace replaced with a new gas unit.

A Project You Cannot Handle Alone

There are many household projects that you can do yourself, but doing an oil to gas conversion is one you will want to leave for a professional. You will want to hire an HVAC contractor to come into do an assessment of your current heating unit to determine the best course of action. Before doing this, you should make a call to your local gas company to make sure that gas service is available where you are located.

If so, you will want to make sure that adding a furnace is feasible, as sometimes there may not be enough gas available to handle all of your home if you already use it for your stove or hot water. If all systems are a go, you can continue the process by finding out if the gas company would do the conversion or if you should hire an HVAC contractor. Most areas will allow you to hire a contractor at your own discretion. 

When To Do The Conversion

You will want to make plans well in advance of when you will be using heat so you will not be left in the cold while the conversion work is being done. Your HVAC contractor would help you figure out what type of furnace would work best for your home and the project would take a bit of time for installation and switching. You will want to do this work during the spring and summertime months to avoid being without heat when it's cold out.

You will need to decide if you want to wait out the oil furnace lifespan before doing the project or if you are ready to ditch it for a new furnace. In some instances, it may be more cost effective to wait until the oil furnace is in need of repair, so you will not get socked with the huge expense of a furnace when you still have one that is working properly. You can start to look into the process and have more time to find a furnace you like while you are waiting for your current furnace to wear out.

Newer oil furnaces may be able to be converted to gas, saving you the expense of having to buy a new unit at all. Your contractor will be able to help you determine what is best for your situation.

Reasons Gas Is Preferred

Overall, oil is much more expensive than natural gas when using it for heating. It is also not as environmentally friendly, which is one of the reasons why people decide to opt for gas over oil. You will be saving money and saving your planet's resources by switching. For more information about the process and the benefits of switching, contact a company like Conservision Energy.